Each Taylor lamp has a satin steel body and round base with a dipping white rectangular poly/cotton shade. The shade is fastened with a matching satin steel finial. Each has a three-way rotary switch. Takes 1 x 150 Watt. 62" Height, 10" Base. Shade: 11" to 9.25" Height, 18" Width, 8.5" Depth.
The frame of each Stix lamp in this collection is a twisting black metal tower. On either side of each corner a thin vertical cane rod is connected to the frame top and bottom. Thin black cane sticks are stacked and woven on each end to those vertical rods, resulting in the appearance of a stick tower. The share are lined with a fabric-like beige paper. Has ball feet at corners. Foot step switch. Takes 2x60 Watt. 50" Height, 9" Square
The rustic modified balance arm natural wood lamp have wood pegs for adjusting shade height and angle. The square post has an open channel through which the black fabric power cord is threaded and hangs out the back. Satin steel rectangular base and accents. Has an off-white poly/cotton bell shade. Three-way rotary socket switch.100 Watt incandescent or three-way CFL bulb. 53" to 61" Height, 24" to 30" Depth. 48" Height pole from base to adjustable arm.; 14" Length adjustable arm to shade. Base: 8" Width, 10" Depth. Shade: 9" Height, 10" Bottom diameter, 5.5" Top diameter.
This deco-inspired 300 Watt floor lamp has a frosted glass bowl shade that flows from the fluted metal socket. Below the socket three horizontal disks of descending size float above a round pole that tapers as it reaches the round base.
Black nickel with round satin steel accent on base.
Takes 2x150 Watt bulbs
High/low socket switch.
Pole tapers from 1.5" to .75" Diameter at bottom.
10" Base appears to be floating above the floor as it sits on top of an 8" weighted sib-base
Shapely Venus Spiral Floor Lamp has a satin steel cone shaped mesh shades and a pyramid shaped base. Spiral has a chrome finish with a pointed arrow tip. Shades are adjustable and rotate horizontally and vertically. Lamp takes four 20-watt MR-16 halogen bulbs, which are included.
100 Watt floor lamp has a white acrylic shade that adjust vertically and horizontally. On/Off rotary socket switch. Available in black or satin steel. 71.5" Height, 10" Base. Shade 5" Height, 12" Diameter.
LED floor lamp with long gooseneck that can be pointed in any direction. Each small cone-like shade is made of frosted acrylic and has a glass lens cover. Satin steel finish with flat round base. On/off toggle switch
The Watson floor lamp takes a mid-century desk design to new heights. It features an angled adjustable arm and extended bell metal shade. The brushed steel finish freshens the design for today’s interiors; dark wood accents the shade and arm. The wand adjusts and tightens the arm angle; the wood accent at the end of the arm is the twist switch
Modeled after our Director collection, these tripod lam have a satin steel base with and off-white tapered drum shade. The cord runs through one leg and extends from the bottom. Has a three-way rotary socket switch. Takes 150 Watt incandescent or three-way CFL bulb. 62" Height,. Base: 49" Height, 18" Footprint. Shade: 12" Height, 20" Bottom diameter, 18" Top diameter.
Add drama as well as illumination with the Mimosa floor lamp. The frosted glass, flute-shaped shade blooms from its metal base providing light in a soft directed glow. A contemporary, yet classic style exudes an air of elegance in a room.
Hard backed drum shades of white Japanese paper with horizontal striped pattern sit on top of white metal poles with round base. On./off rotary socket switch. 100 Watt incandescent or 26 Watt CFL bulb . 60" Height, 13" Diameter base. Shade: 10.75" Height, 17.75" Diameter
The angled back leg of each Twix lamp straightens where it intersects the other two angles legs and extends to under the shade where it bends at a right angle to hold the socket, securing the bulb horizontally. This allows the black fabric shade to be positioned off-center of the pole. Metal with black matte finish. Black cylinder accented pull-chain switch.
The frame of each Stix lamp in this collection is a twisting black metal tower. On either side of each corner a thin vertical cane rod is connected to the frame top and bottom. Thin black cane sticks are stacked and woven on each end to those vertical rods, resulting in the appearance of a stick tower. The share are lined with a fabric-like beige paper. Black stick lamp body and flat round base. Foot step switch. Takes 1x100 Watt. 68" Height., 10" Diameter base. Shade: 24" Height, 7.5" Square
These telescoping modified arc lamps have a satin steel finish with an adjustable white linen shade. A decorative ball locks in the height. The shades are adjustable up to 45°. Three-way rotary socket switch. 150 Watt incandescent or three-way CFL bulb. Height adjusts from 55" to 62", 11"Diameter stacked base. Shade: 8.5" Height, 13.25" Bottom Diameter, 10" Top diameter.
A grand-scale version of our earlier shelf floor lamps. This shelf lamp stands 72" tall! Black MDF veneer open box frame has an off-white collapsible square poly/cotton shade. Bottom and two additional shelves provide three storage/display spaces. Ball-accented on/off pull-chain switch. 150 Watt. 72" Height, 11.5" Square, 17" Clearance between shelves. Shade: 17.5" Height, 9" Square
The Middleton lamps have black painted frames and window panes. Each lamp has shade panels lined with PVC backed off-white fabric. The bottom of each shade is enclosed by a wood panel. The bottom and two additional shelves provide three storage/display spaces. Pull-chain switch. Takes 1x150 Watt. 63" Height, 10.25" Square, 15.5" Clearance between shelves. Shade 15" Height.