This is a carousel with one large image and a track of thumbnails below. Select any of the image buttons to change the main image above.
Brushed Nickel 24-Inch Downrod
Please log in or create an account to access the project tools.
Description
- Brushed Nickel 24-Inch Downrod
- Finish Group - Brushed Nickel, Wet Rated
Specifications
-
BC#:2298960
-
Brand:
-
Display Finish:Brushed Nickel
-
Width (In.):1.0
-
Height (In.):24.0
-
Length (In.):1
-
Weight (Lb.):1.6
-
Location Rating:Wet Location
-
Certification:UL see Resources
-
Primary Style:Transitional
-
Type:Downrod
-
UPC:640665016093
-
Manufacturer Product ID:990024FBN
Disclaimers
Due to some manufacturer's pricing policies, additional discounts cannot be applied to all items. Promo codes provided in emails or on this product detail page can be entered during checkout to determine an item's discount eligibility. Please note sale, clearance, doorbusters, hot buys, open box and limited time deal items are not eligible for additional promo code discounts.
WARNING: This product can expose you to chemicals or compounds which are known to the State of California to cause cancer and/or birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
WARNING: This product can expose you to chemicals or compounds which are known to the State of California to cause cancer and/or birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Resources
- Ceiling Fan Buying Guide
- Location Rating: Wet Location
- Certification: UL
Shipping and Returns
Item ships by FedEx/UPS Ground Shipping.
Usually Ships in - 6 to 8 weeks
Is this item Returnable?
Yes, within policy terms, no restocking fee, customer pays return shipping costs.
Is this item Cancellable?
Yes, requests are not guaranteed and are dependent on the status of the order. See cancellation policy.
Reviews
Rated 5 out of
5
by
Richard from
12-inch Downrod Becomes 8-inch
I actually needed an 8-inch downrod. So, I drilled out the top lock holes to be the same size as the original holes, and in line with those holes. I did this by carefully wrapping the rod in two layers of blue painter tape and fastening it in the drill press vise. I then used a iron pipe cutter to remove the excess length. Finally, I used a variable speed Dremel tool with grinding stone to smooth out the inside cut area in order to prevent any damage to the wiring.
Date published: 2023-03-18
Rated 4 out of
5
by
Roger from
Should have gone smaller
I purchased this 72" downrod on advice from several retail stores and the distributor who is associated with Hinkley (Capitol Lighting). Unfortunately I should have gone with the 60" downrod instead.
Date published: 2023-07-05